HOME · Twitter · LinkedIn · publications · @ Ars Technica · Running IPv6 (Apress, 2005) · BGP (O'Reilly, 2002) · BGPexpert.com · presentations · firstname.lastname@example.org
I currently have a MacBook Air and plan on getting a MacBook Pro with Retina Display when the new models are released.
Both of these lack Ethernet ports. So I got Apple's 10/100 Ethernet to USB adapter two years ago. But it's pretty useless, because it only does 11 MB/sec, while I get 14 - 16 (sometimes as high as 22) MB/sec over wifi. So when a year ago Apple released a 10/100/1000 ethernet to Thunderbolt adapter I got that one. Which is great, except that you can either plug in the GE adapter or an external screen, not both.
When I get the new computer, I guess I'll have to buy a second GE adapter so I can transfer data between the two computers at the highest possible speed. There are now 10/100/1000 Ethernet - USB3 adapters. Those should give me full GE performance on the new computer that will have USB3, but in the meantime something better than wifi using USB2 on my current machine.
Looking at Amazon UK, there are numerous options. Can anyone recommend a specific one? My requirements:
I didn't get any recommendations. I decided to go with the Anker one. Here are the unboxing photos:
This is how it compares to Apple's 10/100 USB and 10/100/1000 Mbps Thunderbolt adapters:
After installing the driver, you get a new ethernet interface:
Although it says the MTU can only be 1280 - 1500 bytes, values up to 4070 are accepted and larger ones are replaced with 4070. Strangely, the actual MTU setting that you get is 4 bytes larger: you can do pings with 4074-byte packets.
The wake-on-LAN seems to work as it should, but I'm not sure the energy efficient ethernet is implemented in the driver. With the Thunderbolt adapter it says it uses EEE when connected to the new Time Capsule, but this one doesn't:
en6: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=23<RXCSUM,TXCSUM,TSO4> ... media: autoselect (1000baseT <full-duplex,flow-control>) status: activeSpeed tops out at around 30 MB/sec over USB 2, but drops once you start sending and receiving at non-trivial rates at the same time. So that's pretty good right now, at double my wifi speed, and it's only going to get better once I have a machine with USB 3.